The MEMSIC MXR2999EL is a non-temperature compensated high-performance XY thermal accelerometer with very low 0g offset drift versus temperature. The MXR2999EL is very repeatable and immune from mechanical shocks changing its operating characteristics making it ideal for demanding applications where a user temperature calibration will be applied on a per device basis to achieve the performance needed for the most demanding applications. In addition to the acceleration outputs, the MXR2999EL also provides a very repeatable analog temperature output which can be used for the over temperature calibration. Thermal MEMS sensing technology provides unsurpassed vibration immunity with an inherent low-pass frequency response of 17Hz eliminating errors attributable to out-of-band and not-of-interest higher frequency accelerations. It is built monolithically using a standard 0.6um CMOS process. There are truly no moving parts and no error causing sensor structure resonances thus providing more accurate acceleration measurements with lower field failures than competitive technology. Acceleration and temperature outputs are analog. Shock survival is greater than 50,000g.

Specifications
Axes: 2(XY)
Range: 0.5
Output: Analog
Sens'ty: 1 V/g
Offset Drift: 0.4
BW: 17
Noise: 0.8
Supply Voltage: 3.0 - 5.3
Size: 5 x 5
Temp Output: Y
Temp Comp: Off

Features and Benefits
*Fully Integrated Thermal Accelerometer
*X/Y Axis, 1V/g
*0g Temperature drift of 0.4mg/C
*3V to 5V Single Power Supply Operation
*Inherent 17Hz Low Pass Filter Response (Vibration Immunity)
*Operating Temperature Range from -40 to 105C
*Shock Survival Greater than 50,000 g
*Package Size 5 x 5 x 2mm

Applications
High Accuracy Inclination Sensing using the ArcTan(X/Y) Method
High Accuracy Inclination Sensing requiring an over temperature calibration.